WORKING PRINCIPLES:
Suction nozzle suckles the preprinted matters and cut paper from paper shelf on the delivery chain, and then delivery to forming mould. In this procedure, coating heat malt adhesive on the paper. The position length of heat melt adhesive and coating weights can be adjusted in the producing without stop if needed. The coating paper will be blew to collecting device after formed, pile and count automatically, delivery out automatically against presetting piled numbers without stop.

PRODUCING SPEED:
The highest speed is 200PCS per minute.
THE RAW MATERIALS:
Paper, combinged aluminum foil paper, Less than 100G/M2
Dry stencil paper

THE CHARACTERISTIC OF THE PAPER SLEEVE FORMER
It has high efficiency that can make 200PS/min. The products can count automatically.

It can be debugged conveniently with small overall and small covering area. (overall dimension(L× W× H): 1850× 1750× 1800mm)
It has low load power with about 5.5kw. (Variable-frequency control with high precision)

The transmission uses the box-pattern. The steel and stability are good and have high precision.

Oil-cycle lubrication.
Its automatic level is high. Easy operation and regulation;
Repair conveniently.
DYK5(NORMAL FORM)
1. The lowest height: 140mm
2. The highest height: 220mm
3. Angle: 21.5° -22.5°
DYK5(ADJUSTABLE FORM)
1The lowest height: 100mm
2. The highest height: 225mm
3. Angle: 15° -28°

STANDARD FITTING:
1, Complete electric-controlled case, including segment and non-segment speed regulating.
2, Vacuum device and air-condensing device
3, Heat melt adhesive device.
4, Products piling device.
5, Fin refusing collecting device.
6, A kit of forming module.
7, Ten fin knives.

Other accessories:
1. Glue programmed controlling
2. Air compression engine
Covering area: 2m× 2m
Overall dimension:
Width: 1.8m length: 2.0m height: 2.0m
Weight: 800kg